The performance of controlled mechanical servosystems in an industrial setting is generally achieved by using PID+ controllers, which are designed using time and frequency responses. In drive systems with more than one axis, it is important to understand if one needs to consider interaction between the axes in the design, and if so, who to tackle the controller design challenge.
This course starts with a short recap of the basic course 'Motion control tuning' for a SISO (single axis) situation, followed by the analysis and control of the multivariable situation including an in-depth treatment of the interaction analysis, de-coupling and MIMO control. The knowledge will be applied to the hands-on case of a mechanical (2 axes) servo problem and all relevant aspects incl. advanced feedforward will be treated.
After completion of the course, you are capable of analysing an industrial multivariable servosystem and designing an adequate control. Based on measurements you can determine if and to what extend the interaction between the axes is a problem. You will be able to apply a stepwise approach to find adequate settings of a multivariable controller, to determine the achievable performance of the controlled system and to understand what limits this performance.
€ 3.750,00 excl. VAT
5 consecutive days
How participants recommend this training to others:
(average score of last 3 editions)
Prof.dr.ir. Maarten Steinbuch
Dr.ir. Ton van der Weiden
Dr.ir. Tom Oomen
Dr.ir. Michael Ronde
Dr.ir. Marcel Heertjes
Dr.ir. Joost Bolder
Ir. Robbert van Herpen
Dr. ir. Rick van der Maas
Dr.ir. Marc van de Wal
Dr.ir. David Rijlaarsdam
Ir. Annemiek van der Maas - Rietschoten
Dr.ir. Michiel Beijen
Ir. Robert van der Weijst
Dr.ir. Rolf Gaasbeek
Ir. Enzo Evers
Ir. Robin de Rozario
Ir. Jurgen van Zundert
05-11-2018 | 09:00 - 17:00
06-11-2018 | 09:00 - 17:00
07-11-2018 | 09:00 - 17:00
08-11-2018 | 09:00 - 17:00
09-11-2018 | 09:00 - 17:00
This course is targetted at engineers that are involved in controlled mechanical servo systems an...
This course is targetted at engineers that are involved in controlled mechanical servo systems and need to better understand what the achievable performance is, how to reach it via use of adequate controllers and which factors limit the performance.
Participants have a Bachelor or Master education in electrical engineering, mechanical engineering, mechatronics, physics or equivalent practical experience and need a solid basic understanding of servo control. Preferably, they have followed the course 'motion control tuning'.
The course consists of a mixture of lectures, demonstrations, exercises and experiments. For the ...
The course consists of a mixture of lectures, demonstrations, exercises and experiments. For the exercises a userfriendly Matlab application is used, whereas the experiments are performed with RTLinux based instrumentation.
The following topics are treated:
- Recap SISO motion control tuning
- Interaction analysis
- MIMO frequency response
- Linear calculus
- MIMO stability
- Sequential loop closing
- Experimental evaluation
- Model based design
- Advanced feedforward
This course is certified by the European society f...
This course is certified by the European society for precision engineering & nanotechnology (euspen) and the Dutch Society for Precision Engineering (DSPE) and leads to the ECP2-certificate.
'I like the combination between theory andexercises, this helps a lot to understand the theory better.'
'Most important items learned: Improve loop shaping. MIMO overall, decoupling, sequential loop.'
'Most important items learned: Sequential loop design, Standard Plant setup, Advanced feedforward.'
The AFC course is intended for all engineers active in mechatronics who want to gain more insight into the possibilities, limitations and implementations of these techniques in an industrial setting.
Read more →
This course treats the essential basis of control in a modern framework and the participants are trained in applying these techniques theoretically and experimentally to mechatronic servo systems.
Read more →